Monday, August 14, 2017

INJEN TECHNOLOGY PERFORMANCE ROUND RACING FILTER X-1090-BB

100% polyurethane on top and bottom, high flow, SuperNano-Web Dry  performance air filter.

Constructed with 100% polyurethane on top and bottom, this high flow, SuperNano-Web Dry  performance air filter will outflow top filters on the market for improved horsepower and torque. Our Dry filter  media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings.




• Constructed with 100% polyurethane on top and bottom 
• High flow, SuperNano-Web Dry performance air filter media - NO OILING
• Our Dry filter media provide maximum airflow for best performance results 
• Washable and reusable for multiple cleaning cycles 
• Tall open evenly spaced 1" deep pleats provide excellent dust holding capacity 
• Eliminate the dust that effects carburetor performance and causes engine wear
• Simple Maintenance - Compressed air trackside air filter maintenance

• Long lasting - maximum performance race after race! 
























Wednesday, August 9, 2017

EVO7302 Cold Air Intake for the 2015-2017 Cadillac ATS 2.0L Turbo

Introducing the all new Evolution sealed air intake system Part Number EVO7302 for the 2015-2017 Cadillac ATS 2.0L Turbo! This intake was designed using the most up-to-date engineering tools and techniques to produce a top quality kit that has no parallel. The EVO7302 cold air intake system is on a whole new level.  From the one-piece sealed housing - that utilizes our all new Injen Twist-Lock System (Patent Pending) to securely attach a massive SuperNano-Web Dry air filter in place - all the way down to premium hardware, Injen has put it all on the table to give you, the customer, the best intake available!

Roto-molded Housing:
The one-piece sealed housing utilizes the all new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO7302 housing also sports the Injen Midnight Edition badge for a cleaner more aggressive under hood appearance.

Roto-molded Intake Tube:
The EVO7302 Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produce huge power gains while retaining a OE quality fit.

SuperNano-Web Dry Air Filter:
“OMG that’s massive” is all you will hear about this SuperNano-Web Dry air filter that is included in the EVO7302. This filter has been uniquely designed to work with the Injen Technology Twist-Lock System. Using our Twist-Lock system has allowed our engineers to use the largest filter possible for this application, which increases the available air volume - resulting in added power, while keeping the installation process quick and simple.

Quality Hardware:
From the Stainless Steel Band Clamps with inner protective liner to the reinforced automotive grade silicone couplers, every aspect is covered for a perfect and secure fit.

Hassle-Free Installation:
Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use less parts to provide the end user with one of the quickest and simplest installation available on the market today.




Dyno Proven:
Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a top notch kit. So after hours of designing and dyno testing, Injen is proud to say that the EVO7302 Evolution Air Intake system puts down numbers of up to  29 additional horsepower and 30 lbs. of  torque.




Key Features:
• Direct fit for the 2015-17 Cadillac ATS
• Dyno Proven gains of up to 29hp and 30 ft-lbs. of torque
• Designed to work with the stock tune
• Twist-Lock Technology (Patent Pending) to securely integrate the filter to the housing
• Aggressive intake growl under acceleration
• Durable Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Stainless steel band clamps with inner protective liner
• Midnight Edition Injen badge for an aggressive under hood appearance
• Massive SuperNano-Web™ Dry Air Filter
• Larger inlet air scoop and induction tube











Tuesday, August 8, 2017

The Injen EVO-1103 Cold Air Intake for the 2012-2016 BMW 3-Series

  Injen is proud to introduce the all new Evolution sealed cold air intake system for the 2012-2016 BMW 3-Series! The EVO1103 cold air intake has been designed using some of the most up-to-date engineering tools and techniques to produce a top notch intake system. The EVO1103 housing encloses an Injen Super-nano web dry air filter to provide both killer air flow and added performance. This all new BMW 3-Series intake kit comes with all necessary hardware to provide a simple and fast installation.

Roto-molded Housing:
The two-piece housing of the EVO1103 sports the Injen Midnight Edition badge for a cleaner more aggressive under hood appearance.

Roto-molded Intake Tube:
This Evolution Air Intake System uses a custom designed and dyno-tuned intake tube to produce good power gains while retaining a clean and quality fit.

SuperNano-Web Dry Air Filters:
The SuperNano-Web Dry air filter is uniquely designed to increase flow, well providing a hassle free cleaning process.

Quality Hardware:
 From the stainless steel band clamps with inner protective liner to the reinforced automotive grade silicone couplers, we use nothing but premium hardware to provide the most secure installation available.  




                           

Dyno Results:




After hours of design work and Dyno testing the EVO1103 Evolution Cold Air Intake system put down an impressive 14 additional horsepower and 15 lbs. of torque.





Key Features: 

• Designed to work with the stock calibration 
• Aggressive intake growl under acceleration
• Durable Roto-Molded Polyethylene tube and housing 
• Reinforced automotive grade silicone couplers
• Stainless steel band clamps with inner protective liner
• Midnight Edition Injen badge for an threatening under hood appearance
• Larger inlet air scoop and induction tube




Monday, May 1, 2017

The Injen Technology SP9003 Cold Air Intake For The 2016 Ford Focus RS

Ford has finally given  us a Focus with the infamous “RS” badge, here in the  states. So naturally we wanted to give it the air flow it deserves. The Injen R&D Team has spent many hours on development, dyno-testing and data collection, so that our intake gives you the best results possible. 

This is a SP intake, replacing every component in the OEM system, including the airbox and the intake pipe. The SP9003 includes a 3” aluminum pipe that routes all the way to the turbo, with all of the necessary parts to produce a perfect fit. The heat shield  has a similar shape to the stock airbox, but is open on the sides and top, so that the filter is exposed to more air while also sealing the top of the shield against the hood, helping to block engine heat. The SP9003 uses the factory air inlet ducts, grabbing air right from the front of the car. 

We have put our intakes through miles of road testing and countless Dyno runs to ensure repeatable and reliable max gains of 17 hp and 20 ft-lb of torque. As Always no cutting or modification to factory components are necessary. The SP9003 air intake is a direct bolt-on for the 2016 Ford Focus RS, and come with all necessary hardware to allow for a quick and simple installation. On top of all that this product is covered by our unbeatable Warranty.

Key Features: 

• Direct fit for 2016 Ford Focus RS
• Dyno proven gains of up to 17 hp and 20 ft-lb of torque
• Designed to work with stock tune
• Air filter placed to receive maximum airflow from the front of the vehicle
• Black powder-coated heat shield helps to keeps unwanted hot air from entering the air filter
• Aggressive intake tone under acceleration
• Available with polished, wrinkle black, wrinkle red or our new Limited Edition Hyper Blue pipe


 





Introducing Injen Technology's all new intake for the 2017 Audi A4 I4-2.0L - the SP3087



Give that A4 of yours some airflow it deserves. The Injen Audi A4 intake SP3087 cranks the power up by 14 hp and 12 Lbs. of Ft. Torque. This A4 intake uses a mandrel-bent aluminum tube, allowing for smoother, uninterrupted airflow straight into the turbo. This cold air intake system also reaches into the depths of the engine bay to keep the air filter isolated from unwanted engine bay heat. Helping keep your air charge cool and dense. The piping for the SP3087 is available with either a polished, wrinkle black or wrinkle red finish to maximize your engine bay aesthetics the way you want.

Handling the filtration duties on this Audi A4 CAI is our SuperNano-Web Dry air filter which provides some of the greatest flow and unbeatable filtration avalible. The SuperNano-Web Dry air filters do not require any oil which makes them easy to clean and care for. The SP3087 cold air intake system comes complete with all required hardware making it a hassle-free and easy installation. like all Injen parts, this intake comes with our unbeatable Warranty!

FEATURES:
• Direct fit for 2017 Audi A4 I4-2.0L (t)
Dyno-proven maximum gains of up to 14 hp and 12 Ft. Lbs. of Torque
• Aggressive intake tone under acceleration
• Stainless steel band clamps with inner protective liner
• Automotive grade silicone couplers
• Designed to work with stock tune
• Air filter placed to receive coolest densest air charge with maximum airflow
• SuperNano-Web Dry air filter requires no oil
• Cold air system help to keep unwanted hot air from entering the air filter
• Mandrel bent 6061-T6 aluminum induction tube
•Available with a polished, wrinkle black or wrinkle red tube


Visit www.injen.com today! 

Thursday, March 2, 2017

Injen Technology Will be at Race Wars LA !



Like a "Fast & Furious" movie come to life -- only legal -- RaceWars LA brings all the high-octane excitement of a street race to Irwindale Speedway. Combining drag racing with show cars, vendors, live music and, of course, gorgeous models, this car lover's event has only been getting bigger and better since it began in 2015. This L.A. edition kicks off the 2017 world tour with some of the hottest builders in the country showcasing their work. Whether you're into classic cars, imports, American-made, trucks or bikes, 742 Race.Wars LA has you covered.

What seems like yesterday, has now become our second tour for the national event  RACE.WARS USA. A tour that started by an idea from a movie has lead itself to become an anticipated event, nationwide. What started in Los Angeles, CA in the Summer of 2015 with a record attendance, then travelled to Las Vegas, NV for an event that set the standard in production, to then leaving it's mark in Dallas, TX with an event that shook its big state, returning to Los Angeles for it's BIG re-appearance in which many thought would never happen again.  RACE.WARS USA has become a lifestyle movement that will continue for years to come.

Join the production event that opens the doors for Enthusiast, Manufacturer's, Fans and Media to a whole new style of culture. With today's growth in branding opportunities that consist of grassroots events, social media, exposure and lead generation, is no wonder why  RACE.WARS USA is an event not to miss. 



Thursday, February 2, 2017

Join Injen at the 2017 King of the Hammers!

That's right! Injen Technology will have a booth at the 2017 King of the Hammers competition in Johnson Valley tomorrow!

Jay Crouch and Corey McClintock will be manning the booth chock full of all sorts of Jeep and truck Injen products for better performance on the off road.


King of the Hammers is considered the toughest one-day off road race in the world. It is the largest off-road race event in North America in terms of both competitors and spectators. It combines desert racing and rock crawling, and has expanded from one race to a series of 5 races held throughout the week and takes place each February in Johnson Valley, CA.



The 11th annual KOH week will commence with Hammertown opening to the public on Friday February 3rd, 2017 and will continue through Saturday, February 11th, 2017.

When you stop by the Injen booth in Hammertown we will have all sorts of promos,  coupons, giveaways and Injen swag. In addition, we will be displaying an LS engine swap jeep (picture at top).


WE'LL SEE YOU THERE! 
















Wednesday, January 25, 2017

Justin Oltz is joining the Injen Family!

Injen Technology is growing to all new heights. To further assist this growth, we are excited to announce the addition of Justin Oltz as our Executive Vice President. Justin kick-started his passion for the automotive world at a young age. Growing up in Florida, Justin had access to everything an automotive nut loves - from go-karts, jet skis, drift cars to drag racing. He had the weather and the access to grow his passion.

So it makes perfect sense that - after graduating from the University of Florida with his Masters Degree in International Business - Justin put that passion to work in the custom calibration equipment field.  Starting out at Eastek International – a global contract manufacturing firm - in 2005, it did not take long for Justin to prove himself and work his way up the ladder.  With several years of international manufacturing and sales experience under his belt, Justin joined the management team at SCT Performance – where he helped setup and lead several of the organizations divisions, including its international department, and the fast-growing fleet business.

Justin re-located from Asia (his home for 8 years) to Florida in 2013 to assist in the sale of SCT to new private equity partners, The Global Environment Fund, and has since spent an average of 300 days a year on the road developing partnerships for the company's growing list of brands – including Bullydog Technologies and Derive Efficiency.

Justin Oltz will be joining the Injen Team on February 15th, 2017.  “Justin will be a major player in the future of Injen Technology. He is bringing a lot of knowledge and experience to the table,” said Ron Delgado, CEO of Injen.  “Not only will he be helping us develop the international market, but the overall growth of Injen moving forward.”

“I’ve been fortunate to know Ron and the Injen team, and to have watched their growth over the past decade,” said Justin Oltz.  “I’m excited to join the Injen family, and to work with our talented team members - as well as our valued supplier and industry partners – to deliver the very best solutions to our growing, loyal customer base.

Please help us welcome Justin to the Injen Family. If you have any questions, please do not hesitate to reach out to us for more information.

Here is to a great future, Welcome aboard Justin!


Monday, January 16, 2017

Introducing the all new PF2059 Air Intake System for the 2016 Toyota Tacoma

Injen is proud to introduce the newest Power Flow cold air intake to our line up. In recent testing PF2059P put out 14 hp and 14 lbs. of torque. This Power Flow intake is constructed out of 6061 Polished Aluminum to provide a clean style. All Injen Power Flow kits are mandrel bent to provide a smooth air track that allows for maximum air speed. Handling the filtration duties on the PF2059 is a large SuperNano-Web Dry air filter providing great flow and unbeatable filtration. The SuperNano-Web Dry air filter does not require any oil and is easy to clean. All Injen cold air intakes come complete with all required hardware to allow the customer to have a hassle-free and easy installation.

Performance Air Filter: 

This intake system utilizes the Injen dry, SuperNano-Web conical high flow air filter that provides unbeatable protection as well as maximum performance.

One-Piece Heat Shield:

The sturdy 18 Gauge black Powder-Coated Heat Shield Helps to block out engine heat. This heat shield uses factory mounting locations to help provide a fast and simple installation.


Mandrel-Bent Tubing:

The 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow.


Quality Hardware:

Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.


Dyno Results:

After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 14 additional horsepower and 14 lbs. of torque.





Key Features: 

• CNC Machined MAF Sensor Pad
• Mandrel Bent 6061 Aluminum Induction Tube
• Stainless Steel Band Clamp with Inner Protective Liner
• Premium Automotive Grade Couplings 
• Large Powder-Coated Heat Shield 
• Large SuperNano-Web™ Dry Air Filter