California EPA Exempts Injen's Cyborg Air Intake Systems... List of Vehicles and Intakes Now Cleared for California!

Injen Technology's Cold Air Intake Systems have been given an exemption by the California Environmental Protection Agency under section 27156 of the California Vehicle Code.  They have issued EXECUTIVE ORDER D-476-8:


IT IS ORDERED AND RESOLVED:  That the installation of the Cyborg Intake Systems, produced and marketed by Injen Technology of 244 Pioneer Place, Pomona CA 91768 has been found not to reduce the effectiveness of the applicable vehicle pollution control systems and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for the vehicles listed in the Attached Exhibit A. 





This exemption is based on cold start emissions testing conducted on a 2013 Fiat 500 with a 1.4L engine, and a 2014 Subaru BRZ with a 2.0L engine.


The following is a list of Injen Technology Cold Air Intakes now covered under this Executive Order. 

INJEN TECHNOLOGY INTRODUCES SP1333P SHORT RAM AIR INTAKE SYSTEM FOR THE KIA OPTIMA I4-2.4L AND HYUNDAI SONATA

Injen is proud to introduce the newest SP Short Ram air intake to our line up for the Kia Optima. In recent testing this kit was producing an additional 9hp and 9lbs. of torque. This SP intake is constructed out of 6061-T6 Aluminum to provide strength and a killer styles under hood appearance. Our kits are mandrel bent to provide a smooth air track that allows for maximum air speed. Handling the filtration duties on this kit is a SuperNano-Web Dry air filter for great flow and unbeatable filtration. The SuperNano-Web Dry air filter dose not require any oil and is easy to clean. Injen SP intakes come complete with all required hardware to allow the customer to have a hassle-free and easy installation.


Performance Air Filter:
This intake system utilizes our 3” dry, SuperNano-Web high flow air filter which provides unbeatable protection as well as excellent performance.

Mandrel-Bent Tubing:
The Polished 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow and adding a clean under hood appearance.

Quality Hardware:
Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.




Dyno Results:
After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 9 additional horsepower and 9 lbs. of torque.

Key features: 

• 3” Mandrel Bent 6061-T6 Aluminum Induction Tube

• Stainless Steel Band Clamp with Inner Protective Liner

• Automotive Grade Silicone Couplers

• 3’’ SuperNano-Web™ Dry Air Filter

SP2098P SHORT RAM AIR INTAKE SYSTEM for the 2015 Lexus RC350

Injen is proud to introduce the newest SP Short Ram air intake system for the 2015 Lexus RC350 to our line up. In recent testing the SP2098 was producing an additional 11hp and 14lbs. of torque. The SP2098 intake is constructed out of 6061-T6 Aluminum to provide strength and clean style to your under hood appearance. Our kits are mandrel bent to provide a smooth air track that allows for maximum air speed. The filtration duties on this SP intake kit are being handeled by a SuperNano-Web Dry air filter for great flow and unbeatable filtration. The SuperNano-Web Dry air filter dose not require any oil and is easy to clean. Injen intakes come complete with all required hardware to allow you to have a hassle-free and easy installation.

Performance Air Filter:
This intake system utilizes our 3.5” dry, SuperNano-Web high flow air filter which provides unbeatable protection as well as excellent performance.

One-Piece Heat Shield:
The sturdy 18 Gauge black Powder-Coated Heat Shield Helps to block out engine heat. This heat shield uses factory mounting locations to help provide a fast and simple installation.

MR Technology:
Mega Ram Technology is a process used to tune the MAF section of the intake to optimize the horsepower and torque gains well maintaining a safe air fuel ratio.

Mandrel-Bent Tubing:
The Polished 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow and adding a clean under hood appearance.

Quality Hardware:
Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.

Dyno Results:
After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 11 additional horsepower and 10 lbs. of torque.

Key Features: 

• Patented MR Technology

• 3.5” Mandrel Bent 6061-T6 Aluminum Induction Tube

• CNC Machined MAF Sensor Pad

• Stainless Steel Band Clamp with Inner Protective Liner

•  Sturdy 18 Gauge Black Powder-Coated Heat shield

• Automotive Grade Silicone Couplers

• 3.5’’ SuperNano-Web™ Dry Air Filter

AmericanMuscle Reviews the Injen EVO9102 Air Intake for the 2015-16 Ford F-150

From the YouTube Page:


Boost your 2015-2016 F-150's Power and Performance with the Injen Evolution Cold Air Intake. This black polyethylene cold air intake completely replaces your factory air box with a free-flowing air box and ultra-smooth intake tube to maximize your air flow.

Boost Power and Performance. Add even more horsepower and torque to your Turbocharged 3.5L EcoBoost F-150 with this Injen Evolution Cold Air Intake. This black polyethylene cold air intake completely replaces your factory air box with a free-flowing air box and ultra-smooth intake tube to maximize your air flow. Power gains of 15 horsepower and 15 ft-lb of torque has been seen at the rear wheels, which will give you more get up and go when passing the slower traffic on the highway. Not only does this CAI provide an increase in power and performance, but the included massive SuperNano-Web Dry Filter will provide excellent filtration.

No Tune Required. Unlike other Cold Air Intakes on the market for the 3.5L EcoBoost F-150s, the Injen Evolution CAI does not require a computer re-tune. The engineers at Injen designed, tuned, and dyno-tested this Cold Air Intake to improve your EcoBoost's power using the stock tune.

Reusable Dry Air Filter. Injen SuperNano-Web Dry Air Filters are made from an oil-free, synthetic filter media for outstanding air flow, filtration and performance. They are re-usable and can be easily cleaned by using compressed air or a common house-hold vacuum cleaner. For best results, the SuperNano-Web Filter should be serviced every 10,000 to 20,000 miles (depending on driving conditions).

Built-in Filter Minder. One of the unique feature of this Evolution Cold Air Intake is the Built-in Filter Minder. With a quick glance of the dial, you'll now when your air filter is in need of maintenance, without having to disassemble the housing.

Made in the USA. Proudly manufactured in the USA, this Cold Air Intake is constructed from roto-molded cross-linked polyethylene for excellent durability and heat insulation. Injen designed this Cold Air Intake to provide smooth unrestricted airflow.

Straight Forward Installation. The Injen Evolution Cold Air Intake Kit is designed to install easily with just basic hand tools. No extra modifications or special tools are required for proper installation. All necessary parts and instructions are included.

Application. This Injen Evolution Cold Air Intake System is specifically designed to fit the 2015 to 2016 F-150s, equipped with the turbocharged 3.5L EcoBoost engine. The intake does not require re-tuning the vehicles computer for operation.