Injen Cold Air Intakes - Not Just for Vehicles! Episode 49 of SKATE EVERYTHING

We've been big fans of the boys down at Braille Skateboarding, and decided to answer their challenge to skate board anything by sending them an Injen cold air intake to ride. The results are here in episode 49 of SKATE EVERYTHING.  Enjoy!

You can follow the Braille Skate Team on social media by heading to: 

INSTAGRAM https://instagram.com/brailleskate/
FACEBOOK: http://www.facebook.com/BrailleSkateb...
GOOGLE +: https://plus.google.com/1075947849409...
TWITTER: http://twitter.com/#!/BrailleSkate

Thanks! from Racer Jasen Harmon...

To all my Amazing Friends and Sponsors,

First off,  I need to say a huge thanks to DSM Motorsports and Southwest Racing Engines.
Without them I literally would not have made it to this race.  Steve rebuilt my motor even though he was in pain (true racer - doing whatever it takes).  Dean and Mike volunteered their time to help get the new motor installed and running on point.  They even worked on it while I  was unable to assist, which in my eyes is a true act of great sportsmanship. They are all great friends!!!  

It was a struggle for this one down to the day we left.  We had no test time on the new motor or the new suspension adjustments we made from the previous races AT ALL.  It was a "break the truck in on the pre-run" kinda race.  Even with the lack of thorough prep, the truck took home the win.  

Race Day: I felt very confident with the truck, given the team I had backing me.  Unfortunately, on Lap 3 we ran into some unforeseen power steering issues that Dean, Mike, Bob, and myself were able to get fixed  for Day 2.  

Day 2, Start Line: 2 miles off the line we are getting caught by the trophy truck that started about 11 mins ahead of us, dust galore!!!  Half way through the first lap my co-dog is throwing up in his helmet!!!!!  My first thought is, “OMG, my harnesses and seats! Well, he’s in for a really long day because I'm not stopping !”  

Everything is fine until Lap 3: We are doing about 70mph, and we see a Class 1 car coming.  I pull to the left for about a 2 mile stretch, which gave him a complete right lane to go through. At the last minute, I realize he is bushwhacking on my left side.  Needless to say, my front tire met his back tires causing damage to my truck.  I will say, as much as it was an uncalled for and irresponsible move on his part, he saved it. I have never before seen the undercarriage of a Class 1 car at 70mph. There’s always a  first time though!   

On Lap 5 with 6 miles to the finish: I lose both power steering and brakes, but we limped in anyway for the win and finish.  

This year has been amazing and I want to thank each and everyone of you that chased my silly ass around the desert, and stuck with me even when it wasn't fun. Thank you from the bottom of my heart - I couldn't have done it without each and every one of you...

Jasen Harmon

California EPA Exempts Injen's Cyborg Air Intake Systems... List of Vehicles and Intakes Now Cleared for California!

Injen Technology's Cold Air Intake Systems have been given an exemption by the California Environmental Protection Agency under section 27156 of the California Vehicle Code.  They have issued EXECUTIVE ORDER D-476-8:


IT IS ORDERED AND RESOLVED:  That the installation of the Cyborg Intake Systems, produced and marketed by Injen Technology of 244 Pioneer Place, Pomona CA 91768 has been found not to reduce the effectiveness of the applicable vehicle pollution control systems and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for the vehicles listed in the Attached Exhibit A. 





This exemption is based on cold start emissions testing conducted on a 2013 Fiat 500 with a 1.4L engine, and a 2014 Subaru BRZ with a 2.0L engine.


The following is a list of Injen Technology Cold Air Intakes now covered under this Executive Order. 

INJEN TECHNOLOGY INTRODUCES SP1333P SHORT RAM AIR INTAKE SYSTEM FOR THE KIA OPTIMA I4-2.4L AND HYUNDAI SONATA

Injen is proud to introduce the newest SP Short Ram air intake to our line up for the Kia Optima. In recent testing this kit was producing an additional 9hp and 9lbs. of torque. This SP intake is constructed out of 6061-T6 Aluminum to provide strength and a killer styles under hood appearance. Our kits are mandrel bent to provide a smooth air track that allows for maximum air speed. Handling the filtration duties on this kit is a SuperNano-Web Dry air filter for great flow and unbeatable filtration. The SuperNano-Web Dry air filter dose not require any oil and is easy to clean. Injen SP intakes come complete with all required hardware to allow the customer to have a hassle-free and easy installation.


Performance Air Filter:
This intake system utilizes our 3” dry, SuperNano-Web high flow air filter which provides unbeatable protection as well as excellent performance.

Mandrel-Bent Tubing:
The Polished 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow and adding a clean under hood appearance.

Quality Hardware:
Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.




Dyno Results:
After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 9 additional horsepower and 9 lbs. of torque.

Key features: 

• 3” Mandrel Bent 6061-T6 Aluminum Induction Tube

• Stainless Steel Band Clamp with Inner Protective Liner

• Automotive Grade Silicone Couplers

• 3’’ SuperNano-Web™ Dry Air Filter

SP2098P SHORT RAM AIR INTAKE SYSTEM for the 2015 Lexus RC350

Injen is proud to introduce the newest SP Short Ram air intake system for the 2015 Lexus RC350 to our line up. In recent testing the SP2098 was producing an additional 11hp and 14lbs. of torque. The SP2098 intake is constructed out of 6061-T6 Aluminum to provide strength and clean style to your under hood appearance. Our kits are mandrel bent to provide a smooth air track that allows for maximum air speed. The filtration duties on this SP intake kit are being handeled by a SuperNano-Web Dry air filter for great flow and unbeatable filtration. The SuperNano-Web Dry air filter dose not require any oil and is easy to clean. Injen intakes come complete with all required hardware to allow you to have a hassle-free and easy installation.

Performance Air Filter:
This intake system utilizes our 3.5” dry, SuperNano-Web high flow air filter which provides unbeatable protection as well as excellent performance.

One-Piece Heat Shield:
The sturdy 18 Gauge black Powder-Coated Heat Shield Helps to block out engine heat. This heat shield uses factory mounting locations to help provide a fast and simple installation.

MR Technology:
Mega Ram Technology is a process used to tune the MAF section of the intake to optimize the horsepower and torque gains well maintaining a safe air fuel ratio.

Mandrel-Bent Tubing:
The Polished 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow and adding a clean under hood appearance.

Quality Hardware:
Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.

Dyno Results:
After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 11 additional horsepower and 10 lbs. of torque.

Key Features: 

• Patented MR Technology

• 3.5” Mandrel Bent 6061-T6 Aluminum Induction Tube

• CNC Machined MAF Sensor Pad

• Stainless Steel Band Clamp with Inner Protective Liner

•  Sturdy 18 Gauge Black Powder-Coated Heat shield

• Automotive Grade Silicone Couplers

• 3.5’’ SuperNano-Web™ Dry Air Filter

AmericanMuscle Reviews the Injen EVO9102 Air Intake for the 2015-16 Ford F-150

From the YouTube Page:


Boost your 2015-2016 F-150's Power and Performance with the Injen Evolution Cold Air Intake. This black polyethylene cold air intake completely replaces your factory air box with a free-flowing air box and ultra-smooth intake tube to maximize your air flow.

Boost Power and Performance. Add even more horsepower and torque to your Turbocharged 3.5L EcoBoost F-150 with this Injen Evolution Cold Air Intake. This black polyethylene cold air intake completely replaces your factory air box with a free-flowing air box and ultra-smooth intake tube to maximize your air flow. Power gains of 15 horsepower and 15 ft-lb of torque has been seen at the rear wheels, which will give you more get up and go when passing the slower traffic on the highway. Not only does this CAI provide an increase in power and performance, but the included massive SuperNano-Web Dry Filter will provide excellent filtration.

No Tune Required. Unlike other Cold Air Intakes on the market for the 3.5L EcoBoost F-150s, the Injen Evolution CAI does not require a computer re-tune. The engineers at Injen designed, tuned, and dyno-tested this Cold Air Intake to improve your EcoBoost's power using the stock tune.

Reusable Dry Air Filter. Injen SuperNano-Web Dry Air Filters are made from an oil-free, synthetic filter media for outstanding air flow, filtration and performance. They are re-usable and can be easily cleaned by using compressed air or a common house-hold vacuum cleaner. For best results, the SuperNano-Web Filter should be serviced every 10,000 to 20,000 miles (depending on driving conditions).

Built-in Filter Minder. One of the unique feature of this Evolution Cold Air Intake is the Built-in Filter Minder. With a quick glance of the dial, you'll now when your air filter is in need of maintenance, without having to disassemble the housing.

Made in the USA. Proudly manufactured in the USA, this Cold Air Intake is constructed from roto-molded cross-linked polyethylene for excellent durability and heat insulation. Injen designed this Cold Air Intake to provide smooth unrestricted airflow.

Straight Forward Installation. The Injen Evolution Cold Air Intake Kit is designed to install easily with just basic hand tools. No extra modifications or special tools are required for proper installation. All necessary parts and instructions are included.

Application. This Injen Evolution Cold Air Intake System is specifically designed to fit the 2015 to 2016 F-150s, equipped with the turbocharged 3.5L EcoBoost engine. The intake does not require re-tuning the vehicles computer for operation. 

Injen Technology launches Full Evolution line for 1999- 2007 GM Trucks

2002-2006	Cadillac	Escalade V8-5.3L/6.0L
2002-2006	Cadillac	Escalade ESV V8-5.3L/6.0L
2002-2006	Cadillac	Escalade EXT V8-5.3L/6.0L
1999-2007	Chevrolet	Silverado V8-4.8L/5.3L/6.0L
2000-2006	Chevrolet	Suburban V8-5.3L/6.0L
2000-2006	Chevrolet	Tahoe V8-4.8L/5.3L
2002-2006	Chevrolet	Avalanche V8-5.3L
1999-2007	GMC	Sierra V8-4.8L/5.3L/6.0L
2001-2006	GMC	Sierra Denali V8-6.0L
2000-2006	GMC	Yukon V8-4.8L/5.3L/6.0L
2001-2006	GMC	Yukon Denali V8-6.0L
2000-2006	GMC	Yukon XL V8-5.3L/6.0L
2000-2006	GMC	Yukon XL Denali V8-5.3L/6.0L

Introducing the all new Evolution sealed air intake system Part Number EVO7100 for the 1999-2007 GM Trucks! This intake was designed using the most up-to-date engineering tools and techniques to produce a top quality kit that has no parallel . The EVO7100 cold air intake system is super clean. This system uses a two-piece housing that utilizes the all new Injen ClearVue window that allows for a quick inspection of your SuperNano-Web Dry air filter. The EVO7100 also comes with premium hardware and couplings. To provide you, the customer, one off the best intakes available for your ride!

Roto-molded Housing:

The housing has been designed to support a large Super-nano Web Dry air filter and the housing also sports the all new ClearVue sight window to allow for easy visual inspection of the air filter.

Roto-molded Intake Tube:

This Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produces huge power gains while retaining a OE quality fit.

SuperNano-Web Dry Air Filter:

The massive SuperNano-Web Dry air filter is uniquely designed to work with the EVO7100. This has allowed our engineers to increases the available air volume while keeping a simple and clean appearance to the intake system. 

Quality Hardware:

Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.                                 

Hassle-Free Installation:

Evolution Air intakes have been carefully designed to use less parts to provide the end user with one of the  quickest and simplest installation available today.