Injen Technology's Cold Air Intake Systems have been given an exemption by the California Environmental Protection Agency under section 27156 of the California Vehicle Code. They have issued EXECUTIVE ORDER D-476-8:
IT IS ORDERED AND RESOLVED: That the installation of the Cyborg Intake Systems, produced and marketed by Injen Technology of 244 Pioneer Place, Pomona CA 91768 has been found not to reduce the effectiveness of the applicable vehicle pollution control systems and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for the vehicles listed in the Attached Exhibit A.
This exemption is based on cold start emissions testing conducted on a 2013 Fiat 500 with a 1.4L engine, and a 2014 Subaru BRZ with a 2.0L engine.
The following is a list of Injen Technology Cold Air Intakes now covered under this Executive Order.
Injen is proud to introduce the newest SP Short Ram air intake to our line up for the Kia Optima. In recent testing this kit was producing an additional 9hp and 9lbs. of torque. This SP intake is constructed out of 6061-T6 Aluminum to provide strength and a killer styles under hood appearance. Our kits are mandrel bent to provide a smooth air track that allows for maximum air speed. Handling the filtration duties on this kit is a SuperNano-Web Dry air filter for great flow and unbeatable filtration. The SuperNano-Web Dry air filter dose not require any oil and is easy to clean. Injen SP intakes come complete with all required hardware to allow the customer to have a hassle-free and easy installation.
Performance Air Filter: This intake system utilizes our 3” dry, SuperNano-Web high flow air filter which provides unbeatable protection as well as excellent performance.
Mandrel-Bent Tubing: The Polished 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow and adding a clean under hood appearance.
Quality Hardware: Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.
Dyno Results: After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 9 additional horsepower and 9 lbs. of torque.
Key features:
• 3” Mandrel Bent 6061-T6 Aluminum Induction Tube
• Stainless Steel Band Clamp with Inner Protective Liner
Injen is proud to introduce the newest SP Short Ram air intake system for the 2015 Lexus RC350 to our line up. In recent testing the SP2098 was producing an additional 11hp and 14lbs. of torque. The SP2098 intake is constructed out of 6061-T6 Aluminum to provide strength and clean style to your under hood appearance. Our kits are mandrel bent to provide a smooth air track that allows for maximum air speed. The filtration duties on this SP intake kit are being handeled by a SuperNano-Web Dry air filter for great flow and unbeatable filtration. The SuperNano-Web Dry air filter dose not require any oil and is easy to clean. Injen intakes come complete with all required hardware to allow you to have a hassle-free and easy installation.
Performance Air Filter: This intake system utilizes our 3.5” dry, SuperNano-Web high flow air filter which provides unbeatable protection as well as excellent performance.
One-Piece Heat Shield: The sturdy 18 Gauge black Powder-Coated Heat Shield Helps to block out engine heat. This heat shield uses factory mounting locations to help provide a fast and simple installation.
MR Technology: Mega Ram Technology is a process used to tune the MAF section of the intake to optimize the horsepower and torque gains well maintaining a safe air fuel ratio.
Mandrel-Bent Tubing: The Polished 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow and adding a clean under hood appearance.
Quality Hardware: Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.
Dyno Results: After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 11 additional horsepower and 10 lbs. of torque.
Key Features:
• Patented MR Technology
• 3.5” Mandrel Bent 6061-T6 Aluminum Induction Tube
• CNC Machined MAF Sensor Pad
• Stainless Steel Band Clamp with Inner Protective Liner
Boost your 2015-2016 F-150's Power and Performance with the Injen Evolution Cold Air Intake. This black polyethylene cold air intake completely replaces your factory air box with a free-flowing air box and ultra-smooth intake tube to maximize your air flow.
Boost Power and Performance. Add even more horsepower and torque to your Turbocharged 3.5L EcoBoost F-150 with this Injen Evolution Cold Air Intake. This black polyethylene cold air intake completely replaces your factory air box with a free-flowing air box and ultra-smooth intake tube to maximize your air flow. Power gains of 15 horsepower and 15 ft-lb of torque has been seen at the rear wheels, which will give you more get up and go when passing the slower traffic on the highway. Not only does this CAI provide an increase in power and performance, but the included massive SuperNano-Web Dry Filter will provide excellent filtration.
No Tune Required. Unlike other Cold Air Intakes on the market for the 3.5L EcoBoost F-150s, the Injen Evolution CAI does not require a computer re-tune. The engineers at Injen designed, tuned, and dyno-tested this Cold Air Intake to improve your EcoBoost's power using the stock tune.
Reusable Dry Air Filter. Injen SuperNano-Web Dry Air Filters are made from an oil-free, synthetic filter media for outstanding air flow, filtration and performance. They are re-usable and can be easily cleaned by using compressed air or a common house-hold vacuum cleaner. For best results, the SuperNano-Web Filter should be serviced every 10,000 to 20,000 miles (depending on driving conditions).
Built-in Filter Minder. One of the unique feature of this Evolution Cold Air Intake is the Built-in Filter Minder. With a quick glance of the dial, you'll now when your air filter is in need of maintenance, without having to disassemble the housing.
Made in the USA. Proudly manufactured in the USA, this Cold Air Intake is constructed from roto-molded cross-linked polyethylene for excellent durability and heat insulation. Injen designed this Cold Air Intake to provide smooth unrestricted airflow.
Straight Forward Installation. The Injen Evolution Cold Air Intake Kit is designed to install easily with just basic hand tools. No extra modifications or special tools are required for proper installation. All necessary parts and instructions are included.
Application. This Injen Evolution Cold Air Intake System is specifically designed to fit the 2015 to 2016 F-150s, equipped with the turbocharged 3.5L EcoBoost engine. The intake does not require re-tuning the vehicles computer for operation.
Introducing the all new Evolution sealed air intake system Part Number EVO7100 for the 1999-2007 GM Trucks! This intake was designed using the most up-to-date engineering tools and techniques to produce a top quality kit that has no parallel . The EVO7100 cold air intake system is super clean. This system uses a two-piece housing that utilizes the all new Injen ClearVue window that allows for a quick inspection of your SuperNano-Web Dry air filter. The EVO7100 also comes with premium hardware and couplings. To provide you, the customer, one off the best intakes available for your ride!
Roto-molded Housing:
The housing has been designed to support a large Super-nano Web Dry air filter and the housing also sports the all new ClearVue sight window to allow for easy visual inspection of the air filter.
Roto-molded Intake Tube:
This Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produces huge power gains while retaining a OE quality fit.
SuperNano-Web Dry Air Filter:
The massive SuperNano-Web Dry air filter is uniquely designed to work with the EVO7100. This has allowed our engineers to increases the available air volume while keeping a simple and clean appearance to the intake system.
Quality Hardware:
Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.
Hassle-Free Installation:
Evolution Air intakes have been carefully designed to use less parts to provide the end user with one of the quickest and simplest installation available today.
Injen is proud to introduce the newest Power Flow cold air intake to our line up. In recent testing, the PF5014 put out 12hp and 16lbs. of torque . Constructed out of 6061-T6 Aluminum, the PF5014 intake provides excellent strength and accentuates the under hood appearance of your vehicle. Injen’s Power Flow line of intake kits are mandrel bent to provide smooth, unrestricted airflow that allows for maximum performance. Handling the filtration duties on this kit is a large SuperNano-Web Dry air filter for great flow and unbeatable filtration. The SuperNano-Web Dry air filter does not require any oil and is easy to clean. Injen Power Flow intakes come complete with all required hardware to allow the customer to have a hassle-free and easy installation.
Performance Air Filter: This intake system utilizes an 5” inlet dry, SuperNano-Web conical high flow air filter that provides unbeatable protection as well as maximum performance.
One-Piece Heat Shield: The sturdy 18 Gauge black Powder-Coated Heat Shield Helps to block out engine heat. This heat shield uses factory mounting locations to help provide a fast and simple installation.
MR Technology: Mega Ram Technology is process used to tune the MAF section of the intake to optimize the horsepower and torque gains well maintaining a safe air fuel ratio.
Mandrel-Bent Tubing: The 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow and is them powder-coated wrinkel black to add a clean, sleek under hood appearance.
Quality Hardware: Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.
Dyno Results: After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 12 additional horsepower and 16 lbs. of torque.
Key Features:
• Patented MR Technology • Mandrel Bent 6061-T6 Aluminum Induction Tube • Stainless Steel Band Clamps • Large Powder-Coated Heat Shield • 5’’ Inlet SuperNano-Web™ Dry Air Filter
FOR MORE INFORMATION PLEASE VISIT OUR WEBSITE AT INJEN.COM
Injen is proud to introduce this all new SES Cat-back exhaust system for the 2015-2016 Ford Mustang GT. After strapping down the Mustang GT and doing some runs on our in house dyno the SES9201 cat back exhaust system put down some promising results, with gains of up to +16 horsepower and +16 lbs. of torque consistently. The SES9201 cat-back exhaust system utilizes 3” mandrel bent tubing and Stainless Steel Investment Cast Flanged connections. This system also incorporates dual, high-flow mufflers to improve performance across the power band and makes for an aggressive sound. Injen has also added an X-pipe to balance the exhaust flow traveling through the system, making the system more efficient and improving the over all performance while minimizing exhaust drone. To finish off the SES9201 cat-back exhaust system, Injen went with some dual 4" polished stainless steel exhaust tips. The SES9201 is a direct bolt-on system that includes all necessary hardware to make sure that you, the customer, has one of the quickest and simplest installs available.
Aggressive Tone:
The Dual High-flow polished mufflers are used to produce a clean powerful sound, while still making sure no horsepower is being left on the table .
X-Pipe Balance Tube:
The X-Pipe evenly distributes the exhaust flow traveling through the system. This creates a more efficient flow for better performance while minimizing drone.
Leak-Free Seal:
High quality Stainless Steel Investment Cast Flanges are used to make sure that you are getting the best sealing surface possible. This system will not distort over time like a slip-fit system causing exhaust leaks.
Dual Polished Tips:
This exhaust system uses dual, polished 4" 304 stainless steel tips for a clean style.
Simple Installation:
This is a direct bolt-on system that requires no modifications and includes all necessary hardware to make sure you have a quick and simple install process.
Features Recap:
• Hand Crafted and Tig Welded to Perfection
• 3” Mandrel Bent 304 Stainless Steel Tubing
• Stainless Steel Investment Cast Flanges For a Fast and Easy Install
•Will Not Distort Over Time Like a Slip-fit System Causing Exhaust Leaks
• Premium Stainless Steel Hardware and Hangers
• Show Quality Embossed Stainless Steel Mufflers
• Polished Single Wall Stainless Steel Rolled Exhaust Tips
Here's a video of the exhaust along with other Injen Products for the 2015-16 Mustang GT and Ecoboost:
