Monday, December 26, 2016

Injen Cold Air Intakes - Not Just for Vehicles! Episode 49 of SKATE EVERYTHING

We've been big fans of the boys down at Braille Skateboarding, and decided to answer their challenge to skate board anything by sending them an Injen cold air intake to ride. The results are here in episode 49 of SKATE EVERYTHING.  Enjoy!




You can follow the Braille Skate Team on social media by heading to: 

INSTAGRAM https://instagram.com/brailleskate/
FACEBOOK: http://www.facebook.com/BrailleSkateb...
GOOGLE +: https://plus.google.com/1075947849409...
TWITTER: http://twitter.com/#!/BrailleSkate
















Tuesday, December 20, 2016

Thanks! from Racer Jasen Harmon...



To all my Amazing Friends and Sponsors,
First off,  I need to say a huge thanks to DSM Motorsports and Southwest Racing Engines.
Without them I literally would not have made it to this race.  Steve rebuilt my motor even though he was in pain (true racer - doing whatever it takes).  Dean and Mike volunteered their time to help get the new motor installed and running on point.  They even worked on it while I  was unable to assist, which in my eyes is a true act of great sportsmanship. They are all great friends!!!  

It was a struggle for this one down to the day we left.  We had no test time on the new motor or the new suspension adjustments we made from the previous races AT ALL.  It was a "break the truck in on the pre-run" kinda race.  Even with the lack of thorough prep, the truck took home the win.  
Race Day: I felt very confident with the truck, given the team I had backing me.  Unfortunately, on Lap 3 we ran into some unforeseen power steering issues that Dean, Mike, Bob, and myself were able to get fixed  for Day 2.  
Day 2, Start Line: 2 miles off the line we are getting caught by the trophy truck that started about 11 mins ahead of us, dust galore!!!  Half way through the first lap my co-dog is throwing up in his helmet!!!!!  My first thought is, “OMG, my harnesses and seats! Well, he’s in for a really long day because I'm not stopping !”  

Everything is fine until Lap 3: We are doing about 70mph, and we see a Class 1 car coming.  I pull to the left for about a 2 mile stretch, which gave him a complete right lane to go through. At the last minute, I realize he is bushwhacking on my left side.  Needless to say, my front tire met his back tires causing damage to my truck.  I will say, as much as it was an uncalled for and irresponsible move on his part, he saved it. I have never before seen the undercarriage of a Class 1 car at 70mph. There’s always a  first time though!   

On Lap 5 with 6 miles to the finish: I lose both power steering and brakes, but we limped in anyway for the win and finish.  
This year has been amazing and I want to thank each and everyone of you that chased my silly ass around the desert, and stuck with me even when it wasn't fun. Thank you from the bottom of my heart - I couldn't have done it without each and every one of you...

Jasen Harmon



Tuesday, October 18, 2016

California EPA Exempts Injen's Cyborg Air Intake Systems... List of Vehicles and Intakes Now Cleared for California!

Injen Technology's Cold Air Intake Systems have been given an exemption by the California Environmental Protection Agency under section 27156 of the California Vehicle Code.  They have issued EXECUTIVE ORDER D-476-8:


IT IS ORDERED AND RESOLVED:  That the installation of the Cyborg Intake Systems, produced and marketed by Injen Technology of 244 Pioneer Place, Pomona CA 91768 has been found not to reduce the effectiveness of the applicable vehicle pollution control systems and, therefore, is exempt from the prohibitions of Section 27156 of the Vehicle Code for the vehicles listed in the Attached Exhibit A. 





This exemption is based on cold start emissions testing conducted on a 2013 Fiat 500 with a 1.4L engine, and a 2014 Subaru BRZ with a 2.0L engine.


The following is a list of Injen Technology Cold Air Intakes now covered under this Executive Order. 












Friday, October 7, 2016

INJEN TECHNOLOGY INTRODUCES SP1333P SHORT RAM AIR INTAKE SYSTEM FOR THE KIA OPTIMA I4-2.4L AND HYUNDAI SONATA




Injen is proud to introduce the newest SP Short Ram air intake to our line up for the Kia Optima. In recent testing this kit was producing an additional 9hp and 9lbs. of torque. This SP intake is constructed out of 6061-T6 Aluminum to provide strength and a killer styles under hood appearance. Our kits are mandrel bent to provide a smooth air track that allows for maximum air speed. Handling the filtration duties on this kit is a SuperNano-Web Dry air filter for great flow and unbeatable filtration. The SuperNano-Web Dry air filter dose not require any oil and is easy to clean. Injen SP intakes come complete with all required hardware to allow the customer to have a hassle-free and easy installation.


Performance Air Filter:
This intake system utilizes our 3” dry, SuperNano-Web high flow air filter which provides unbeatable protection as well as excellent performance.

Mandrel-Bent Tubing:
The Polished 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow and adding a clean under hood appearance.

Quality Hardware:
Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.




Dyno Results:
After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 9 additional horsepower and 9 lbs. of torque.





Key features: 
• 3” Mandrel Bent 6061-T6 Aluminum Induction Tube
• Stainless Steel Band Clamp with Inner Protective Liner
• Automotive Grade Silicone Couplers
• 3’’ SuperNano-Web™ Dry Air Filter


SP2098P SHORT RAM AIR INTAKE SYSTEM for the 2015 Lexus RC350


Injen is proud to introduce the newest SP Short Ram air intake system for the 2015 Lexus RC350 to our line up. In recent testing the SP2098 was producing an additional 11hp and 14lbs. of torque. The SP2098 intake is constructed out of 6061-T6 Aluminum to provide strength and clean style to your under hood appearance. Our kits are mandrel bent to provide a smooth air track that allows for maximum air speed. The filtration duties on this SP intake kit are being handeled by a SuperNano-Web Dry air filter for great flow and unbeatable filtration. The SuperNano-Web Dry air filter dose not require any oil and is easy to clean. Injen intakes come complete with all required hardware to allow you to have a hassle-free and easy installation.

Performance Air Filter:
This intake system utilizes our 3.5” dry, SuperNano-Web high flow air filter which provides unbeatable protection as well as excellent performance.

One-Piece Heat Shield:
The sturdy 18 Gauge black Powder-Coated Heat Shield Helps to block out engine heat. This heat shield uses factory mounting locations to help provide a fast and simple installation.

MR Technology:
Mega Ram Technology is a process used to tune the MAF section of the intake to optimize the horsepower and torque gains well maintaining a safe air fuel ratio.

Mandrel-Bent Tubing:
The Polished 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow and adding a clean under hood appearance.

Quality Hardware:
Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.

Dyno Results:
After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 11 additional horsepower and 10 lbs. of torque.





Key Features: 

• Patented MR Technology
• 3.5” Mandrel Bent 6061-T6 Aluminum Induction Tube
• CNC Machined MAF Sensor Pad
• Stainless Steel Band Clamp with Inner Protective Liner
•  Sturdy 18 Gauge Black Powder-Coated Heat shield
• Automotive Grade Silicone Couplers
• 3.5’’ SuperNano-Web™ Dry Air Filter

Tuesday, October 4, 2016

AmericanMuscle Reviews the Injen EVO9102 Air Intake for the 2015-16 Ford F-150



From the YouTube Page:


Boost your 2015-2016 F-150's Power and Performance with the Injen Evolution Cold Air Intake. This black polyethylene cold air intake completely replaces your factory air box with a free-flowing air box and ultra-smooth intake tube to maximize your air flow.

Boost Power and Performance. Add even more horsepower and torque to your Turbocharged 3.5L EcoBoost F-150 with this Injen Evolution Cold Air Intake. This black polyethylene cold air intake completely replaces your factory air box with a free-flowing air box and ultra-smooth intake tube to maximize your air flow. Power gains of 15 horsepower and 15 ft-lb of torque has been seen at the rear wheels, which will give you more get up and go when passing the slower traffic on the highway. Not only does this CAI provide an increase in power and performance, but the included massive SuperNano-Web Dry Filter will provide excellent filtration.

No Tune Required. Unlike other Cold Air Intakes on the market for the 3.5L EcoBoost F-150s, the Injen Evolution CAI does not require a computer re-tune. The engineers at Injen designed, tuned, and dyno-tested this Cold Air Intake to improve your EcoBoost's power using the stock tune.

Reusable Dry Air Filter. Injen SuperNano-Web Dry Air Filters are made from an oil-free, synthetic filter media for outstanding air flow, filtration and performance. They are re-usable and can be easily cleaned by using compressed air or a common house-hold vacuum cleaner. For best results, the SuperNano-Web Filter should be serviced every 10,000 to 20,000 miles (depending on driving conditions).

Built-in Filter Minder. One of the unique feature of this Evolution Cold Air Intake is the Built-in Filter Minder. With a quick glance of the dial, you'll now when your air filter is in need of maintenance, without having to disassemble the housing.

Made in the USA. Proudly manufactured in the USA, this Cold Air Intake is constructed from roto-molded cross-linked polyethylene for excellent durability and heat insulation. Injen designed this Cold Air Intake to provide smooth unrestricted airflow.

Straight Forward Installation. The Injen Evolution Cold Air Intake Kit is designed to install easily with just basic hand tools. No extra modifications or special tools are required for proper installation. All necessary parts and instructions are included.

Application. This Injen Evolution Cold Air Intake System is specifically designed to fit the 2015 to 2016 F-150s, equipped with the turbocharged 3.5L EcoBoost engine. The intake does not require re-tuning the vehicles computer for operation. 

Monday, September 26, 2016

Injen Technology launches Full Evolution line for 1999- 2007 GM Trucks


2002-2006 Cadillac Escalade V8-5.3L/6.0L
2002-2006 Cadillac Escalade ESV V8-5.3L/6.0L
2002-2006 Cadillac Escalade EXT V8-5.3L/6.0L
1999-2007 Chevrolet Silverado V8-4.8L/5.3L/6.0L
2000-2006 Chevrolet Suburban V8-5.3L/6.0L
2000-2006 Chevrolet Tahoe V8-4.8L/5.3L
2002-2006 Chevrolet Avalanche V8-5.3L
1999-2007 GMC Sierra V8-4.8L/5.3L/6.0L
2001-2006 GMC Sierra Denali V8-6.0L
2000-2006 GMC Yukon V8-4.8L/5.3L/6.0L
2001-2006 GMC Yukon Denali V8-6.0L
2000-2006 GMC Yukon XL V8-5.3L/6.0L
2000-2006 GMC Yukon XL Denali V8-5.3L/6.0L

Introducing the all new Evolution sealed air intake system Part Number EVO7100 for the 1999-2007 GM Trucks! This intake was designed using the most up-to-date engineering tools and techniques to produce a top quality kit that has no parallel . The EVO7100 cold air intake system is super clean. This system uses a two-piece housing that utilizes the all new Injen ClearVue window that allows for a quick inspection of your SuperNano-Web Dry air filter. The EVO7100 also comes with premium hardware and couplings. To provide you, the customer, one off the best intakes available for your ride!

Roto-molded Housing:
The housing has been designed to support a large Super-nano Web Dry air filter and the housing also sports the all new ClearVue sight window to allow for easy visual inspection of the air filter.

Roto-molded Intake Tube:
This Evolution Air Intake System uses a custom designed and dyno-tuned, intake tube to produces huge power gains while retaining a OE quality fit.

SuperNano-Web Dry Air Filter:
The massive SuperNano-Web Dry air filter is uniquely designed to work with the EVO7100. This has allowed our engineers to increases the available air volume while keeping a simple and clean appearance to the intake system. 

Quality Hardware:
Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.                                 

Hassle-Free Installation:
Evolution Air intakes have been carefully designed to use less parts to provide the end user with one of the  quickest and simplest installation available today.


Tuesday, September 6, 2016

Injen's New Power Flow Air Intake for the 2016 Jeep Grand Cherokee V6 3.0L EcoDiesel

Injen is proud to introduce the newest Power Flow cold air intake to our line up. In recent testing, the PF5014 put out 12hp and 16lbs. of torque . Constructed out of 6061-T6 Aluminum, the PF5014 intake provides excellent strength and accentuates the under hood appearance of your vehicle. Injen’s Power Flow line of intake kits are mandrel bent to provide smooth, unrestricted airflow that allows for maximum performance. Handling the filtration duties on this kit is a large SuperNano-Web Dry air filter for great flow and unbeatable filtration. The SuperNano-Web Dry air filter does not require any oil and is easy to clean. Injen Power Flow intakes come complete with all required hardware to allow the customer to have a hassle-free and easy installation.




Performance Air Filter:
This intake system utilizes an 5” inlet dry, SuperNano-Web conical high flow air filter that provides unbeatable protection as well as maximum performance.

One-Piece Heat Shield:
The sturdy 18 Gauge black Powder-Coated Heat Shield Helps to block out engine heat. This heat shield uses factory mounting locations to help provide a fast and simple installation.

MR Technology:
Mega Ram Technology is process used to tune the MAF section of the intake to optimize the horsepower and torque gains well maintaining a safe air fuel ratio.

Mandrel-Bent Tubing:
The 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow and is them powder-coated wrinkel black to add a clean, sleek under hood appearance.


Quality Hardware:
Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.

Dyno Results:
After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 12 additional horsepower and 16 lbs. of torque.



Key Features:

• Patented MR Technology
• Mandrel Bent 6061-T6 Aluminum Induction Tube
• Stainless Steel Band Clamps
• Large Powder-Coated Heat Shield
• 5’’ Inlet SuperNano-Web™ Dry Air Filter


FOR MORE INFORMATION PLEASE VISIT OUR WEBSITE AT INJEN.COM





Monday, August 29, 2016

Injen Technology SES9201 3" DUAL CAT-BACK EXHAUST SYSTEM for the 2015-16 Ford Mustang GT 5.0L


Injen is proud to introduce this all new SES Cat-back exhaust system for the 2015-2016 Ford Mustang GT. After strapping down the Mustang GT and doing some runs on our in house dyno the SES9201 cat back exhaust system put down some promising results, with gains of up to +16 horsepower and +16 lbs. of torque consistently. The SES9201 cat-back exhaust system utilizes 3” mandrel bent tubing and Stainless Steel Investment Cast Flanged connections. This system also incorporates dual, high-flow mufflers to improve performance across the power band and makes for an aggressive sound. Injen has also added an X-pipe to balance the exhaust flow traveling through the system, making the system more efficient and improving the over all performance while minimizing exhaust drone. To finish off the SES9201 cat-back exhaust system, Injen went with some dual 4" polished stainless steel exhaust tips. The SES9201 is a direct bolt-on system that includes all necessary hardware to make sure that you, the customer, has one of the quickest and simplest installs available.

Aggressive Tone:

The Dual High-flow polished mufflers are used to produce a clean powerful sound, while still making sure no horsepower is being left on the table .



X-Pipe Balance Tube:

The X-Pipe evenly distributes the exhaust flow traveling through the system. This creates a more efficient flow for better performance while minimizing drone.


Leak-Free Seal:

High quality Stainless Steel Investment Cast Flanges are used to make sure that you are getting the best sealing surface possible. This system will not distort over time like a slip-fit system causing exhaust leaks.


Dual Polished Tips:

This exhaust system uses dual, polished 4" 304 stainless steel tips for a clean style.



Simple Installation:

This is a direct bolt-on system that requires no modifications and includes all necessary hardware to make sure you have a quick and simple install process.





Features Recap: 

• Hand Crafted and Tig Welded to Perfection
• 3” Mandrel Bent 304 Stainless Steel Tubing
• Stainless Steel Investment Cast Flanges For a Fast and Easy Install
•Will Not Distort Over Time Like a Slip-fit System Causing Exhaust Leaks
• Premium Stainless Steel Hardware and Hangers
• Show Quality Embossed Stainless Steel Mufflers
• Polished Single Wall Stainless Steel Rolled Exhaust Tips


Here's a video of the exhaust along with other Injen Products for the 2015-16 Mustang GT and Ecoboost:


Tuesday, August 9, 2016

ESX Sets WORLD RECORD for Fastest Subaru Quarter Mile with a 7.22 Using Injen Technology Cold Air Intake!

We received word from the ESX Racing Team that Ali Afshar has set a world record for the fastest Subaru Quarter Mile with 7.22 secs.

Of course, the ESX Subaru is outfitted with the latest cold air intake from Injen!





























 



Monday, August 8, 2016

Injen Power Flow air intake PF5021P Cold Air Intake for the 2015 Dodge Durango

Injen is proud to release our new Power Flow cold air intake for the 2015 Dodge Durango to our line up. In recent testing this kit produced 14hp and 16lbs. of torque . The Power Flow intake is constructed out of 6061-T6 Aluminum then powder coated wrinkle black to provide strength and stealth under hood appearance Our kits are mandrel bent to provide a smooth air track that allows for maximum air speed. Handling the filtration duties on this kit is a SuperNano-Web Dry air filter for great flow and unbeatable filtration. The SuperNano-Web Dry air filter dose not require any oil and is easy to clean. This Injen Power Flow intake comes complete with all of the required hardware that you need to make sure that you have a hassle-free and simple installation.


Performance Air Filter:
This intake system utilizes our 4” SuperNano-Web Dry conical high flow air filter that not only provides unbeatable protection but also the convenience of simple maintenance.

Mandrel-Bent Tubing:
The 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow and adding a clean under hood appearance.

Quality Hardware:
Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.



Dyno Tested:

After hours of design and dyno testing This Power Flow Air Intake system was providing some good power gains. This kit consistently  racked up  14 additional horsepower and 16 lbs. of  torque on our in-house Dyno.

KEY FEATURES SUMMARY:

• 3.5" Mandrel Bent 6061-T6 Aluminum Induction Tube
• Stainless Steel Band Clamp with Inner Protective Liner
• Automotive Grade Silicone Couplers
• 4’’ SuperNano-Web™ Dry Air Filter



Injen Announces EVO1100 Cold Air Intake System for the 2015-2016 BMW M3/M4

Injen is proud to be introducing the all new Evolution sealed cold air intake system for the 2015-2016 BMW M3/M4! This intake has been designed using the some of the most up-to-date engineering tools and techniques to produce a top notch kit. This intake system is on a whole new level, From the one-piece sealed housings that utilizes the all new Injen Twist-lock System (Patent Pending) to securely attach the Injen SuperNano-Web Dry air filters in place. All the way down to premium hardware, Injen has put it all out there to give you, the customer one of the most killer intakes available.






Roto-molded Housings:
Both of the one-piece sealed housings utilize the all new Injen Twist-lock System (Patent Pending) to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary hardware and provides a simple installation that even your mom could do.  Also to top it all off the housings sports the ClearVue sight window allowing for a easy visual inspection of the air filter when every you pop the hood.

Roto-molded Intake Tubes:
This Evolution Air Intake System uses a couple of custom designed and dyno-tuned, intake tubes to produces huge power gains while retaining a clean and quality fit.

SuperNano-Web Dry Air Filters:
The SuperNano-Web Dry air filter is uniquely designed to work with the Injen Technology Twist-Lock System (Patent Pending). The Twist-Lock system has allowed our engineers to use one of the largest filters possible to increases air volume while keeping the installation process simple. 

Quality Hardware:
Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.                                 

Hassle-Free Installation:
Evolution cold air intakes that use the all new Twist-Lock System (Patent Pending) have been carefully designed to use fewer parts to provide the end user with one of the quickest and simplest installation available today.


Dyno Results:

After hours of design and dyno testing This Evolution Air Intake system was putting down 22 additional horsepower and 27 lbs. of  torque.

KEY FEATURES SUMMARY: 

• Durable Roto-Molded Polyethylene Tubes and Housings 
• Twist-Lock System (Patent Pending) to Securely Integrate the Filter to the Housing
• Reinforced Automotive Grade Silicone Couplers
• Stainless Steel Band Clamps with inner protective liner
• ClearVue Window for Easy Visual Inspection of The Filter
• Massive SuperNano-Web™ Dry Air Filter
• Larger Inlet Air Scoop and Induction Tubes


FOR MORE INFORMATION ON THIS AND OTHER PATENTED INJEN TECHNOLOGY COLD AIR INTAKE / INDUCTION SYSTEMS PLEASE VISIT OUR WEBSITE HERE. 










Thursday, August 4, 2016

Injen Technology returns to Sponsor ESX Racing Team





Our friends at ESX have sent out this announcement: 

Hi Racing Friends,

We're proud to announce that long time sponsors of our racing and film endeavors "INJEN TECHNOLOGY" home of "THE WORLDS FIRST TUNED COLD AIR INTAKE SYSTEMS" has joined our Lucas Oil / ESX Race team again for 2016!

Our team is now headed north to the "PROTECT THE HARVEST NORTHWEST NATIONALS" in Seattle, WA. This is the next round of the NHRA Mello Yellow Drag Racing Series.

The partnership with Injen has been a great pairing and part of our car and movie culture since 2002 so we're proud to have the Injen name back on our cars again!


We are also excited to have first time sponsors "DWANE LANE'S SKAGIT SUBARU" from Burlington, WA sponsor our Subaru BRZ (the Quickest Subaru in the country which ran a blistering 7.45 second 1/4 mile last weekend and the Sonoma Nationals NHRA event) for this weekends race!

For more information about Injen, please visit www.injen.com

And for information about Dwayne Lane's Skagit Subaru please visit www.dwaynelane.com

Thanks to our new sponsors and all our previous sponsors for helping us chase after our dreams!



See you at the track!

Sincerely,

Ali Afshar
ESX Productions | Motorsports

Injen Technology is proud to again sponsor ESX Racing and look forward to a great race season!

Thursday, July 21, 2016

Introducing the All New SP2097 Air Intake System for the 2016 Lexus IS200T and RC200T





Injen Technology is proud to introduce the newest SP Short Ram air intake to our line up. In recent testing this kit was producing an additional 14hp and 13lbs. of torque. This SP intake is constructed out of 6061-T6 Aluminum to provide strength and a killer styles under hood appearance. Our kits are mandrel bent to provide a smooth air track that allows for maximum air speed. Handling the filtration duties on this kit is a SuperNano-Web Dry air filter for great flow and unbeatable filtration. The SuperNano-Web Dry air filter dose not require any oil and is easy to clean. Injen SP intakes come complete with all required hardware to allow the customer to have a hassle-free and easy installation.



Performance Air Filter:

This intake system utilizes our 3.25” dry, SuperNano-Web high flow air filter which provides unbeatable protection as well as excellent performance.

One-Piece Heat Shield:

The sturdy 18 Gauge black Powder-Coated Heat Shield Helps to block out engine heat. This heat shield uses factory mounting locations to help provide a fast and simple installation.

MR Technology:

Mega Ram Technology is a process used to tune the MAF section of the intake to optimize the horsepower and torque gains well maintaining a safe air fuel ratio.

Mandrel-Bent Tubing:


The Polished 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow and adding a clean under hood appearance.

Quality Hardware:

Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.

Dyno Results:

After hours of design and dyno testing This Power Flow Air Intake system was providing good power racking up 14 additional horsepower and 13 lbs. of torque.


















Thursday, July 7, 2016

ENTER FOR A CHANCE TO WIN A FREE MUSTANG AIR INTAKE FROM INJEN


You’ve always wanted to upgrade the horsepower and torque of your 2015-16 Mustang 4 cylinder Ecoboost or your GT V8, but haven’t had the time to invest in the quality air induction system you want - now’s your chance to win either the EVO9200 for your Ecoboost, or the EVO9201 for your GT -- ABSOLUTELY FREE!

Injen Technology, a leader in aftermarket performance products invites you to enter our NEXT STEP IN EVOLUTION contest so you can have a chance to win one of our Evolution Air Induction Systems guaranteed to enhance your Mustang’s performance.

Injen Technology continues to set the industry benchmark for innovation, styling and technology. From the Power Flow ™ series, MR Technology ™ , and now the Evolution roto-molded air induction systems, Injen is always at the forefront of impressive fuel economy gains, more horsepower and more torque. The Evolution Air Intake system is the performance product designed to ram cool air where it's needed most.

The Evolution line of cold air intakes also feature the largest Super Nano-web filter on the market, as well as features such as the built-in Filter Minder -- sure to become the industry standard -- that allow easy filter inspection. 100% CAD designed for an easy install.





HOW TO ENTER:

Post a recent picture of yourself and your Mustang here in this contest thread on the forum. That automatically enters you into the contest. Winners will be picked at random from the entries posted on the forum. You must post a picture in order to be eligible to win the contest.


All entries must be received by AUGUST 8, 2016 12 noon PST


PRIZES:

Winners will be determined by the random selection of the judges and are final.


1ST PLACE WINNER: receives either the EVO9200 for the 2015-16 Ford Mustang Ecoboost or the EVO9201 for the 2015-16 Ford Mustang GT (your choice) absolutely free. This includes FREE SHIPPING.



  
THE EVO9200 AIR INDUCTION SYSTEM FOR THE 2015-16 FORD MUSTANG ECOBOOST









THE EVO9201 AIR INDUCTION SYSTEM FOR THE 2015-16 FORD MUSTANG GT












BUT THAT’S NOT ALL!


2ND PLACE WINNER: Wins the opportunity to purchase the NEW Injen SES9200 exhaust for 25% off retail value!




THE SES9201 EXHAUST FOR THE FORD MUSTANG





























3RD PLACE WINNER: Wins the opportunity to purchase the NEW Injen FM9200i intercooler for 30% off retail value!



















THE FM9200i  INTERCOOLER FOR THE FORD MUSTANG.








NOTE HOW WIDE IT IS WHEN COMPARED TO THE OEM INTERCOOLER.








You can read more about these products here




OFFICIAL RULES:
NO PURCHASE IS NECESSARY TO ENTER OR WIN. A PURCHASE DOES NOT INCREASE THE CHANCES OF WINNING.


1. Eligibility: This Campaign is open only to those who post on this Mustang Forum and who are 18 as of the date of entry.The Campaign is only open to legal residents of the United States, and is void where prohibited by law. Employees of Injen Technology, its affiliates, subsidiaries, advertising and promotion agencies, and suppliers, (collectively the “Employees”), and immediate family members and/or those living in the same household of Employees are not eligible to participate in the Campaign. The Campaign is subject to all applicable federal, state, and local laws and regulations. Void where prohibited.


2. Agreement to Rules: By participating, the Contestant (“You”) agree to be fully unconditionally bound by these Rules, and You represent and warrant that You meet the eligibility requirements. In addition, You agree to accept the decisions of Injen Technology as final and binding as it relates to the content of this Campaign.


3. Campaign Period: Entries will be accepted online starting on July 6th, 2016 and ending August 8th, 2016 at 12 Noon PST. All online entries must be received by August 8th, 2016 at 12 Noon PST.


4. How to Enter: The Campaign must be entered by submitting an entry in the contest thread. The entry must fulfill all Campaign requirements, as specified, to be eligible to win a prize. Entries that are incomplete or do not adhere to the rules or specifications may be disqualified at the sole discretion of Injen Technology. You may enter only once. You must provide the information requested. You may not enter more times than indicated by using multiple email addresses, identities, or devices in an attempt to circumvent the rules. If You use fraudulent methods or otherwise attempt to circumvent the rules, Injen Technology will void your entry and inform the forum admins.

5. Prizes: The Winner(s) of the Campaign (the “Winner”) will receive prizes as listed above. Actual/appraised value may differ at time of prize award. The specifics of the prize shall be solely determined by Injen Technology. No cash or other prize substitution shall be permitted except at Injen Technology’s discretion. The prize is nontransferable. Any and all prize-related expenses, including without limitation any and all federal, state, and/or local taxes, shall be the sole responsibility of Winner. No substitution of prize or transfer/assignment of prize to others or request for the cash equivalent by Winner is permitted. Acceptance of prize constitutes permission for Injen Technology to use Winner’s name, likeness, and entry for purposes of advertising and trade without further compensation, unless prohibited by law.


6. Odds: The odds of winning depend on the number of eligible entries received.


7. Winner Selection and Notification: Winner will be selected by a random drawing under the supervision of Injen Technology. Winner will be notified by post and private message within five (5) days following selection of Winner. Injen Technology shall have no liability for Winner’s failure to receive notices due to spam, junk e-mail or other security settings or for Winner’s provision of incorrect or otherwise non-functioning contact information. If Winner cannot be contacted, is ineligible, fails to claim the prize within [20 days] from the time award notification was sent, or fails to timely return a completed and executed declaration and release as required, the prize may be forfeited and an alternate Winner selected. Receipt by Winner of the prize offered in this Campaign is conditioned upon compliance with any and all federal, state, and local laws and regulations. ANY VIOLATION OF THESE OFFICIAL RULES BY WINNER will be at Injen Technology‘S SOLE DISCRETION) WILL RESULT IN WINNER’S DISQUALIFICATION AS WINNER OF THE CAMPAIGN, AND ALL PRIVILEGES AS WINNER WILL BE IMMEDIATELY TERMINATED.


8. Rights Granted by You: By entering this content (e.g., photo, video, text, etc.), You understand and agree that Injen Technology, anyone acting on behalf of Injen Technology, and Injen Technology’s licensees, successors, and assigns, shall have the right, where permitted by law, to print, publish, broadcast, distribute, and use in any media now known or hereafter developed, in perpetuity and throughout the World, without limitation, your entry, name, portrait, picture, voice, likeness, image, statements about the Campaign, and biographical information for news, publicity, information, trade, advertising, public relations, and promotional purposes. without any further compensation, notice, review, or consent. Optional verbiage for Contests: By entering this content, You represent and warrant that your entry is an original work of authorship, and does not violate any third party’s proprietary or intellectual property rights. If your entry infringes upon the intellectual property right of another, You will be disqualified at the sole discretion of Injen Technology. If the content of your entry is claimed to constitute infringement of any proprietary or intellectual proprietary rights of any third party, You shall, at your sole expense, defend or settle against such claims. You shall indemnify, defend, and hold harmless Injen Technology from and against any suit, proceeding, claims, liability, loss, damage, costs or expense, which Injen Technology may incur, suffer, or be required to pay arising out of such infringement or suspected infringement of any third party’s right.


9. Terms & Conditions: Injen Technology reserves the right, in its sole discretion, to cancel, terminate, modify or suspend the Campaign should virus, bug, non-authorized human intervention, fraud, or other cause beyond Injen Technology’s control corrupt or affect the administration, security, fairness, or proper conduct of the Campaign. In such case, Injen Technology may select the Winner from all eligible entries received prior to and/or after (if appropriate) the action taken by Injen Technology. Injen Technology reserves the right, in its sole discretion, to disqualify any individual who tampers or attempts to tamper with the entry process or the operation of the Campaign or website or violates these Terms & Conditions. Injen Technology has the right, in its sole discretion, to maintain the integrity of the Campaign, to void votes for any reason, including, but not limited to: multiple entries from the same user from different IP addresses; multiple entries from the same computer in excess of that allowed by Campaign rules; or the use of bots, macros, scripts, or other technical means for entering. Any attempt by an entrant to deliberately damage any website or undermine the legitimate operation of the Campaign may be a violation of criminal and civil laws. Should such attempt be made, Injen Technology reserves the right to seek damages to the fullest extent permitted by law.


10. Limitation of Liability: By entering, You agree to release and hold harmless Injen Technology and its subsidiaries, affiliates, advertising and promotion agencies, partners, representatives, agents, successors, assigns, employees, officers, and directors from any liability, illness, injury, death, loss, litigation, claim, or damage that may occur, directly or indirectly, whether caused by negligence or not, from: (i) such entrant’s participation in the Campaign and/or his/her acceptance, possession, use, or misuse of any prize or any portion thereof; (ii) technical failures of any kind, including but not limited to the malfunction of any computer, cable, network, hardware, or software, or other mechanical equipment; (iii) the unavailability or inaccessibility of any transmissions, telephone, or Internet service; (iv) unauthorized human intervention in any part of the entry process or the Promotion; (v) electronic or human error in the administration of the Promotion or the processing of entries.


11. Disputes: THIS Campaign IS GOVERNED BY THE LAWS OF the United States AND the state of California , WITHOUT RESPECT TO CONFLICT OF LAW DOCTRINES. As a condition of participating in this Campaign, participant agrees that any and all disputes that cannot be resolved between the parties, and causes of action arising out of or connected with this Campaign, shall be resolved individually, without resort to any form of class action, exclusively before a court located in California having jurisdiction. Further, in any such dispute, under no circumstances shall participant be permitted to obtain awards for, and hereby waives all rights to, punitive, incidental, or consequential damages, including reasonable attorney’s fees, other than participant’s actual out-of-pocket expenses (i.e. costs associated with entering this Campaign). Participant further waives all rights to have damages multiplied or increased.


12. Sponsor: The Sponsor of the Campaign is INJEN TECHNOLOGY 244 PIONEER PLACE, POMONA CA 91768


13. The Campaign hosted by Injen Technology is in no way sponsored, endorsed, administered by, or associated with Facebook, but is simply being promoted by Injen Technology through its various social media including: Facebook, Youtube, Twitter & Instagram as well as the Mustangforums.com board.