Monday, August 29, 2016

Injen Technology SES9201 3" DUAL CAT-BACK EXHAUST SYSTEM for the 2015-16 Ford Mustang GT 5.0L

Injen is proud to introduce this all new SES Cat-back exhaust system for the 2015-2016 Ford Mustang GT. After strapping down the Mustang GT and doing some runs on our in house dyno the SES9201 cat back exhaust system put down some promising results, with gains of up to +16 horsepower and +16 lbs. of torque consistently. The SES9201 cat-back exhaust system utilizes 3” mandrel bent tubing and Stainless Steel Investment Cast Flanged connections. This system also incorporates dual, high-flow mufflers to improve performance across the power band and makes for an aggressive sound. Injen has also added an X-pipe to balance the exhaust flow traveling through the system, making the system more efficient and improving the over all performance while minimizing exhaust drone. To finish off the SES9201 cat-back exhaust system, Injen went with some dual 4" polished stainless steel exhaust tips. The SES9201 is a direct bolt-on system that includes all necessary hardware to make sure that you, the customer, has one of the quickest and simplest installs available.

Aggressive Tone:

The Dual High-flow polished mufflers are used to produce a clean powerful sound, while still making sure no horsepower is being left on the table .

X-Pipe Balance Tube:

The X-Pipe evenly distributes the exhaust flow traveling through the system. This creates a more efficient flow for better performance while minimizing drone.

Leak-Free Seal:

High quality Stainless Steel Investment Cast Flanges are used to make sure that you are getting the best sealing surface possible. This system will not distort over time like a slip-fit system causing exhaust leaks.

Dual Polished Tips:

This exhaust system uses dual, polished 4" 304 stainless steel tips for a clean style.

Simple Installation:

This is a direct bolt-on system that requires no modifications and includes all necessary hardware to make sure you have a quick and simple install process.

Features Recap: 

• Hand Crafted and Tig Welded to Perfection
• 3” Mandrel Bent 304 Stainless Steel Tubing
• Stainless Steel Investment Cast Flanges For a Fast and Easy Install
•Will Not Distort Over Time Like a Slip-fit System Causing Exhaust Leaks
• Premium Stainless Steel Hardware and Hangers
• Show Quality Embossed Stainless Steel Mufflers
• Polished Single Wall Stainless Steel Rolled Exhaust Tips

Here's a video of the exhaust along with other Injen Products for the 2015-16 Mustang GT and Ecoboost:

Tuesday, August 9, 2016

ESX Sets WORLD RECORD for Fastest Subaru Quarter Mile with a 7.22 Using Injen Technology Cold Air Intake!

We received word from the ESX Racing Team that Ali Afshar has set a world record for the fastest Subaru Quarter Mile with 7.22 secs.

Of course, the ESX Subaru is outfitted with the latest cold air intake from Injen!


Monday, August 8, 2016

Injen Power Flow air intake PF5021P Cold Air Intake for the 2015 Dodge Durango

Injen is proud to release our new Power Flow cold air intake for the 2015 Dodge Durango to our line up. In recent testing this kit produced 14hp and 16lbs. of torque . The Power Flow intake is constructed out of 6061-T6 Aluminum then powder coated wrinkle black to provide strength and stealth under hood appearance Our kits are mandrel bent to provide a smooth air track that allows for maximum air speed. Handling the filtration duties on this kit is a SuperNano-Web Dry air filter for great flow and unbeatable filtration. The SuperNano-Web Dry air filter dose not require any oil and is easy to clean. This Injen Power Flow intake comes complete with all of the required hardware that you need to make sure that you have a hassle-free and simple installation.

Performance Air Filter:
This intake system utilizes our 4” SuperNano-Web Dry conical high flow air filter that not only provides unbeatable protection but also the convenience of simple maintenance.

Mandrel-Bent Tubing:
The 6061-T6 Aluminum Intake Tube is Mandrel-Bent to administer a less restrictive intake air path resulting in smoother airflow and adding a clean under hood appearance.

Quality Hardware:
Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.

Dyno Tested:

After hours of design and dyno testing This Power Flow Air Intake system was providing some good power gains. This kit consistently  racked up  14 additional horsepower and 16 lbs. of  torque on our in-house Dyno.


• 3.5" Mandrel Bent 6061-T6 Aluminum Induction Tube
• Stainless Steel Band Clamp with Inner Protective Liner
• Automotive Grade Silicone Couplers
• 4’’ SuperNano-Web™ Dry Air Filter

Injen Announces EVO1100 Cold Air Intake System for the 2015-2016 BMW M3/M4

Injen is proud to be introducing the all new Evolution sealed cold air intake system for the 2015-2016 BMW M3/M4! This intake has been designed using the some of the most up-to-date engineering tools and techniques to produce a top notch kit. This intake system is on a whole new level, From the one-piece sealed housings that utilizes the all new Injen Twist-lock System (Patent Pending) to securely attach the Injen SuperNano-Web Dry air filters in place. All the way down to premium hardware, Injen has put it all out there to give you, the customer one of the most killer intakes available.

Roto-molded Housings:
Both of the one-piece sealed housings utilize the all new Injen Twist-lock System (Patent Pending) to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary hardware and provides a simple installation that even your mom could do.  Also to top it all off the housings sports the ClearVue sight window allowing for a easy visual inspection of the air filter when every you pop the hood.

Roto-molded Intake Tubes:
This Evolution Air Intake System uses a couple of custom designed and dyno-tuned, intake tubes to produces huge power gains while retaining a clean and quality fit.

SuperNano-Web Dry Air Filters:
The SuperNano-Web Dry air filter is uniquely designed to work with the Injen Technology Twist-Lock System (Patent Pending). The Twist-Lock system has allowed our engineers to use one of the largest filters possible to increases air volume while keeping the installation process simple. 

Quality Hardware:
Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available.                                 

Hassle-Free Installation:
Evolution cold air intakes that use the all new Twist-Lock System (Patent Pending) have been carefully designed to use fewer parts to provide the end user with one of the quickest and simplest installation available today.

Dyno Results:

After hours of design and dyno testing This Evolution Air Intake system was putting down 22 additional horsepower and 27 lbs. of  torque.


• Durable Roto-Molded Polyethylene Tubes and Housings 
• Twist-Lock System (Patent Pending) to Securely Integrate the Filter to the Housing
• Reinforced Automotive Grade Silicone Couplers
• Stainless Steel Band Clamps with inner protective liner
• ClearVue Window for Easy Visual Inspection of The Filter
• Massive SuperNano-Web™ Dry Air Filter
• Larger Inlet Air Scoop and Induction Tubes


Thursday, August 4, 2016

Injen Technology returns to Sponsor ESX Racing Team

Our friends at ESX have sent out this announcement: 

Hi Racing Friends,

We're proud to announce that long time sponsors of our racing and film endeavors "INJEN TECHNOLOGY" home of "THE WORLDS FIRST TUNED COLD AIR INTAKE SYSTEMS" has joined our Lucas Oil / ESX Race team again for 2016!

Our team is now headed north to the "PROTECT THE HARVEST NORTHWEST NATIONALS" in Seattle, WA. This is the next round of the NHRA Mello Yellow Drag Racing Series.

The partnership with Injen has been a great pairing and part of our car and movie culture since 2002 so we're proud to have the Injen name back on our cars again!

We are also excited to have first time sponsors "DWANE LANE'S SKAGIT SUBARU" from Burlington, WA sponsor our Subaru BRZ (the Quickest Subaru in the country which ran a blistering 7.45 second 1/4 mile last weekend and the Sonoma Nationals NHRA event) for this weekends race!

For more information about Injen, please visit

And for information about Dwayne Lane's Skagit Subaru please visit

Thanks to our new sponsors and all our previous sponsors for helping us chase after our dreams!

See you at the track!


Ali Afshar
ESX Productions | Motorsports

Injen Technology is proud to again sponsor ESX Racing and look forward to a great race season!